Rural Water Dispensing Station

The new Rural Water Dispensing Station has been designed for quicker delivery of water and ease of access for all vehicles. It is located on the West Bypass Road with six bays for large trucks and two for small vehicles.

For further information regarding the Rural Water Dispensing Station, please contact the Public Works Department.

   

Commercial

There are 4 bays for top load trucks with over 4 meters of clearance, plus 2 bays with hose outlets at the 1.2m height for other vehicles. All six of these bays have 3” (75mm) male cam-lock outlets. Users are required to have a 3” (75mm) female cam-lock fitting plus adequate hose attached to reach their tank.

Activation Steps:

  1. Connect to the water outlet
  2. Key in your Operator Number - Press ENTER
  3. Key in your PIN number - press ENTER
  4. Enter volume in litres - press ENTER (40,000 litres for maximum fill)

Residential

The facility also has an outlet for smaller vehicles and tanks, or for the occasional user. This has a 2” (50mm) outlet with a male cam-lock fitting. Users are required to have a 2” (50mm) female cam-lock fitting with enough hose attached to reach their tank.

Activation Steps:

  1. Connect to the water outlet
  2. Ensure the switch is in the OFF position
  3. Key in your Operator Number - Press ENTER
  4. Key in your PIN number - press ENTER
  5. Select pump - press ENTER
  6. (Pump 7 is on the left and pump 8 is on the right)
  7. Enter volume in litres - press ENTER (5,000 litres for maximum fill)
  8. Turn switch to ON position

Alternate Location for Residential

There is a alternate location for residential users in Charlie Lake.  See map for directions.

Accounts & Prices

For all account information please visit City Hall.

  

Questions or Comments?

Facility: City Hall
Address: 10631 - 100 Street, Fort St. John, BC V1J 3Z5
Phone: 250.787.8150
Fax: 250.787.8181
Contact: Operations
Phone: 250.787.8173