For water rates see Finance
Fresh Water Supply
Fort St. John Water System has 5 shallow wells which are sealed and covered. They are located 5 km upstream of the Peace River Bridge and beside the railway bridge in Taylor. All wells are currently mounded, and periodically submerged during the freshet. The wells are pumped to the High Lift Pump Station and then pumped through 11 kms of pipeline to the City of Fort St John’s Water Treatment Facility. The average flow is 9000 M3 per day.
Fluoridation - The current program started in 1963. It uses 25% Hydrofluorosilicic Acid for fluoridation. Monthly sample is regularly sent to ALS Lab for analysis. The process is automated and the target concentration is 0.7 to 0.9 mg/l. The Canadian Drinking Water Guidelines permit 1.5 mg/l.
Filters - The filters were upgraded in 2005. The media and underdrain were changed. The greensand filters were replaced because of extensive damages. The current media is pyrolucite; media level is checked yearly and additional pyrolucite is added as needed. In total there are 8 pressure filters.
Chlorination - 15% concentration solution of Sodium Hypochlorite (NaHCl) is used for disinfection. The process is automated by means of a chlorinator to achieve a minimum concentration of 0.2 mg/l through out the system. NaHCl solution is delivered twice per year.
Storage – There are two treated water reservoirs and are used to supply the city with extra water during peak demands and to store water when excess demand is not required.
- The 6.8 Million litres reservoir is located at 106th Ave & 106th St. It has an average turnover of 18 hours.
- The 36.4 Million litres reservoir is located at the East Bypass Rd (79th St) & 112th Ave. It has an average turnover of 4 days.
Unidirectional Flushing Program (UDF)
What Is Unidirectional Flushing? - UDF is a method of cleaning the water mainlines through a network of flushing sequences with the water being discharged from a fire hydrant. The UDF program involves closing valves in a specific sequence to create water movement in one direction, while opening specific hydrants at the end of that sequence. Maintaining the flushing sequence is important so that the water used in the flushing sequence remains clean. The UDF technique allows higher water flow velocities by isolating certain sections of the water mains. This higher water velocity allows for better scouring of pipes and will use 40% less water in the flushing process than traditional flushing. The flushing of the pipes will dislodge and remove mineral deposits, sediments, and biological deposits that accumulate in the water mains.
Why Are We Flushing? - Slow moving water in the water mains allows minerals and sediments to deposit and accumulate over time. These deposits can result in water discoloration and water quality problems and contribute to the corrosion of some of the pipes. A bio-film of microorganisms can also generate overtime in the pipes.
What Are The Benefits Of Flushing? - The benefits include maintaining and potentially improving the water quality, colour, and distribution. Flushing reduces bacterial growth, restores disinfectant residual, improves colour and turbidity, controls corrosion and can help restore flow and pressures in the water distribution system. A preventative maintenance program can also be implemented on valves and hydrants in conjunction with the flushing program at very little additional cost.
What could happen? - A hydrant near you may be opened and used to discharge water into the street for several minutes. There may be a slight drop in pressure or a presence of discoloration from the minerals and sediments that are being flushed out. Water service should not be disrupted during the flushing process. If a discoloration is noticed, please turn the tap off for 15 minutes and flush from your bathtub until the water is clear.
Question Or Concerns - If there are any questions or concerns in regards to the Unidirectional Flushing Program, please feel free to contact Denis Drapeau with the City of Fort St. John Utilities Department by telephone at 250-787-8150 or by email at firstname.lastname@example.org.